quadient IS-350 User Manual Download Page 59

Page: 59 / 212

Changing the Weighing Type

At start-up, the default weighing type is active.

See also

• To change the default weighing type as supervisor, see

How to Change the

Default Weighing Type

on page 142.

• To change the weighing type according to the type of process you want to run

(see

Choosing a Weighing Type

on page 53), follow the steps outlined below.

How to Change the Weighing Type

To change the weighing type from the home screen:
1.

Either:

Press

and select the path:

Batch Settings Weighing

type

Press

The Weighing type screen is displayed.

The options actually displayed in the screen depend on the

weighing devices that are connected to your Mailing System

and on features that are activated.

Select the weighing type.

| Page 54 | Jul-24-2023 01:56 |

Processing

Mail

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands