quadient IS-350 Page 55 User Manual Download

Page: 55 / 212

Settings Details

3.6

Changing the Current Account

To process a batch of mail pieces using another account (on account-enabled

configurations), change the account as follows.

How to Change Account

To change accounts:
1.

As a user:

Press

and select the path:

Account

The list of accounts that are available is displayed.

Select the account you want to use and press

[OK]

Press

to return to the home screen. The current account number is

displayed.

Using Barcode Scanner to Change Account

A barcode scanner can be used for “One Click” entry of accounts

into your Mailing System.

| Page 50 | Jul-24-2023 01:56 |

Processing

Mail

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands