quadient IS-350, User Manual

Page: 47 / 212

How to Process [Normal] Mail
In mode Standard Weighing
From the [ Normal ] home screen, to print postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Press . The system motors start running.
3. Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener.
Do not try to moisten self-adhesive envelopes.
If a mail piece is bigger than mail path maximum thickness, you
may use a label tape. To know the maximum thickness, see Mail
Specifications on page 199.
4. The Mailing System prints postage and the mail piece is ejected.
In optional mode Differential Weighing
From the [ Normal ] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the
instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
42
| Page 42 | Jul-24-2023 01:56 |
3
Processing
Mail