quadient IS-350 Page 162 User Manual Download

Page: 162 / 212

Time and Date Management

8.12

Time and Date Setup

Time and date are required for postage and are provided by the postal authorities. As

a result, you cannot manually adjust the system time and date.
However, you can ask the system to check the current time and date and display them.

To check the time and date, make sure the connection to the

Postal Services is available. See

How to Set the Postal/Online

Services Connection

on page 154.

How to Check the Machine Time and Date

To check the current time and date:
1.

As supervisor (see

How to Log in as Supervisor

on page 130):

Press

and select the path:

Machine settings

Date and Time

The system displays current time and date.

How to Adjust the Machine Time and Date

To adjust the current time and date:
1.

As supervisor (see

How to Log in as Supervisor

on page 130):

Press

and select the path:

Machine settings

Adjust Date & Time

To resynchronize the time with server, press

[OK]

Press

[OK]

to connect Postal Server.

The system adjusts its time if necessary.

157

| Page 157 | | Jul-24-2023 01:56 |

Configuring

your

Mailing

System

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands