quadient IN-700 User Manual Download Page 53

Page: 53 / 280

The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.

When sealer is activated, collect the mail stack in the catch tray
and put stack aside to let envelopes dry.

To print several identical labels:

Press

and enter the number of labels.

Make sure the labels are available in the label dispenser (see

Filling the Label

Dispenser

on page 90).

Press

to print the labels.

Applying Postage for [Payment Surcharge Entry] Mail

Sequence of Settings for [Payment Surcharge Entry] Mail

The procedure below outlines steps to enter the surcharge amount manually.

The sequence is identical to

Applying Postage for [Standard] Mail

on page 39, except for

the following:

• Postage must be set manually to the desired amount.

Make sure you have already completed the preparation steps
mentioned in

Preparing and Starting your Work Session

on page

31.

| Page 48 | Jan-13-2017 09:38 |

Pr
ocessing Mail

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 53 / 280

Search results

Summary of Contents for IN-700

Reviews: