quadient IN-700 Page 42 User Manual Download

Page: 42 / 280

Using the Feeder

The procedure below describes how to place a stack of mail pieces in the Hopper.

Depending on the weighing method you choose to run mail, you may have to insert the
envelopes one by one or place a stack of envelopes in the hopper.

Each stack may mix envelopes of different thickness and size.

How to Use the Feeder

Feeding a stack of mail pieces:

Arrange the mail pieces according to their size (the largest/heaviest letters beneath).

Fan the envelopes to separate them.

Bevel the edge of the stack.

Place the envelopes in the hopper, their upper edge resting against the rear guide.

Ensure that all the envelopes are stacked along the rear guide, from largest to smallest.

Pr
ocessing Mail

| Page 37 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands