quadient IN-700 User Manual Download Page 252

Page: 252 / 280

Cleaning the Feeder Belts and Rollers

Follow the steps below to clean the belts and rollers of the feeder and of the Dynamic Scale
(if installed).

How to Clean the Feeder Belts and Rollers

To clean the feeder belts and rollers:

Open equipment covers; in the Mixed-Size Feeder, press the left of the upper blue
handle to release and lift up the drive assembly.

Clean the belts and/or rollers with a damp cloth or 70° alcohol on a cotton applicator.

Push down the upper drive assembly until it locks back into position and close the
feeder cover.

Cleaning Mail Path Sensors

The sensors are light sensitive devices successively covered by the envelopes during their
travel along the mail path.

Clean the mail path sensors as indicated below on system base, feeder, and optional
dynamic scale.

Maintaining y

our Mailing System

247

| Page 247 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 252 / 280

Search results

Summary of Contents for IN-700

Reviews: