quadient IN-700 Page 244 User Manual Download

Page: 244 / 280

Manual Cleaning

If automatic cleaning is not sufficient, you can clean the printing heads manually.

How to Clean the Print Heads Manually

To clean the print heads manually:

Open the base cover.

Open the top cover.

Remove the ink cartridge (see

How to Change the Ink Cartridge

on page 240).

Clean the heads with a soft damp cloth.

Put the cartridge back in place.

Close the base cover.

Changing the Ink Cartridge

The Power cord must be plugged in to move the cartridge into the
'replacement' position.

Maintaining y

our Mailing System

239

| Page 239 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands