quadient IN-700 User Manual Download Page 233

Page: 233 / 280

Managing Prepaid Imprints
(PPI)

9.7

In supervisor mode, you can:

• Display the list of PPIs in the machine
• Add new PPIs using an USB memory key
• Delete PPIs
• Set the default PPI (see

How to Change the Default PPI

on page 201)

The List of PPIs

The list of PPIs displays the PPIs that are installed in the Mailing System and indicates

with a mark

the default PPI.

How to Display the List of PPIs

To display the list of PPIs:

In supervisor mode (see

How to Log in as Supervisor

on page 180):

Press

and select the path:

Options and updates

PPI management

The list of PPIs is displayed.

228

| Page 228 | Jan-13-2017 09:38 |

Options and Updates

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 233 / 280

Search results

Summary of Contents for IN-700

Reviews: