manualshive.com logo in svg

quadient IN-700, User Manual, Page: 205 / 280

Share
Download
quadient IN-700 User Manual Download Page 205

Postage Imprint Default Set-
tings

8.9

The settings of the postage imprint 'by default' include:

• Imprint default settings: sets the default rate, ERA and slogan for mailing operations
• Automatic Date Advance: enables early date change to continue printing postage

with the new date after post office closing hours

• Printing offset: sets the default offset print position from the right side of the envelope.

Imprint Default Settings

You can set default parameters for the indicia and imprint elements that follow:

• Rate
• Prepaid imprint
• ERA
• Slogan

On list screens, a mark 

 indicates the default parameter.

Changing the Default Postage Rate

Use the procedure below to change the rate the machine activates at start-up.

How to Change the Default Rate

To change the default rate:

1.

In supervisor mode (see 

How to Log in as Supervisor

 on page 180):

Press 

 and select the path:

Default user settings 

Default imprint

parameters 

Default rate

2.

Select the default rate using the rate wizard.

3.

Press [OK] to validate.

See also

•

Managing Postal Rates

 on page 226

200

|   Page 200 | Jan-13-2017 09:38 |

8

Configuring y

our Mailing System

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments