quadient IN-700 Page 192 User Manual Download

Page: 192 / 280

System Time-outs and Settings

8.6

Machine settings include:

• System motor time-outs
• Sleep mode time-out

System Time-outs

The system time-outs are defined as follows:

The period of time the system waits for an envelope after pressing

Once this time-out is reached the system stops.

Start

The period of time the system waits for the next envelope after printing.
Once this time-out is reached, the system will stop.

Stop

Period of inactivity after which the system automatically switches to 'Sleep'
mode (see

Power Management

on page 24).

Sleep

You can set a long Stop time-out to have time to feed the hopper
before the machine stops.

187

| Page 187 | | Jan-13-2017 09:38 |

Configuring y

our Mailing System

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands