manualshive.com logo in svg

quadient IN-700, User Manual, Page: 184 / 280

Share
Download
quadient IN-700 User Manual Download Page 184

Settings Overview

8.1

This section describes two types of settings that are available on your system:

• User settings, that only last as long as the user who applies them is logged in.
• Supervisor settings, sets the default or permanent settings of your Mailing System.

Other user settings are described in the corresponding sections:

Processing Mail

 on page 27, 

Maintaining your Mailing System

 on

page 231, etc.

User Settings

The user settings described in the sections below are:

• Setting the display language.
• Adjusting the screen contrast.
• Enabling/disabling key beeps and warning/error beeps.

Supervisor Settings

Your Mailing System has one supervisor PIN code that allows you to configure the default
settings and perform other functions such as managing accounts and access rights,
generating certain reports, etc.

The Supervisor PIN code of the system has been provided to your
organization in a separate distribution.

The supervisor settings allow you to:

• Change the default user settings.
• Modify system time-outs.
• Set credit warnings (high amount, low credit) and activate a crediting PIN code.
• Define a default weighing method for mailing, and calibrate the weighing devices.
• Design a default imprint (rate, ERA, slogan), activate the Automatic Date Advance

function and set a default printing offset.

• Activate sealing mode as default setting.
• Enter connection parameters.

179

|   Page 179 |  | Jan-13-2017 09:38 |

8

Configuring y

our Mailing System

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments