quadient IN-700 User Manual Download Page 177

Page: 177 / 280

Testing the Connection to Online Services

You may test the connection to the Online Services server via the commands in the Online
Services menu:

• Ping server

Establishes a connection and checks whether the server answers to a 'ping' command.
This test:

- Validates connection parameters (see

Connection Settings

on page 209).

- Indicates that the server can be contacted.

• Test server

Establishes a connection and tests the communication dialogue with the server. This
test indicates that transactions can be held normally.

Test server is a bandwidth test and should only be undertaken after
a request from Customer Service.

How to Test the Connection to Online Services

To ping the server:

As a user:

Press

and select the path:

Online Services

Ping server

Or, as supervisor (see

How to Log in as Supervisor

on page 180):

Press

and select the path:

Online Services

Ping server

172

| Page 172 | Jan-13-2017 09:38 |

Online Ser

vices

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 177 / 280

Search results

Summary of Contents for IN-700

Reviews: