manualshive.com logo in svg

quadient IN-700, User Manual, Page: 175 / 280

Share
Download
quadient IN-700 User Manual Download Page 175

Connecting to Online Services

7.2

Automatic calls

To fully benefit from the convenience and power of Online Services, your Mailing System
should permanently be connected to a network connection so that it can link to the Online
Server automatically whenever required.

For the usage of some services, some automatic calls are scheduled to upload
corresponding data.

For the Reports service, the Mailing System automatically connects at the end of each
month to upload accounting and postal category statistics.

For the Ink Management service, the Mailing System automatically connects when it is
time to re-order ink supplies.

It is strongly recommended that you leave the Mailing System turned
on, in sleep mode, and connected to a network during the night, to
allow the connection to the Online Server to occur automatically.

Manual Calls

Manual calls allow you to connect to the Online Server in order to retrieve new information
(update postal rates, ERA/slogan or messages) or to enable features and options (weigh
platform capacity, number of accounts, differential weighing, etc.).

You will be instructed to use this function when rates change if you
do not have a rate protection agreement.

You can trigger a call to the Online Services server from the user menu as well as from
the supervisor menu.

170

|   Page 170 | Jan-13-2017 09:38 |

7

Online Ser

vices

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments