quadient IN-700 User Manual Download Page 137

Page: 137 / 280

Select Edit / Modify.

The Edit / Modify screen is displayed.

Change the operator options as needed and press [OK] to display the Operator
modification summary screen (Use key [C] to clear characters).

Press [OK] to accept your changes.

Assigning Accounts to Operators

You can define the Accounts Access to each operator, by assigning accounts, groups or
subgroups of accounts to the operator.

Assigning a group (or subgroup) automatically assigns all the accounts of the group.

If you assign a group (or subgroup) to an operator, all accounts
you will add afterwards to the group will be automatically assigned
to the operator.

On user screens, only accounts are displayed. Groups and
subgroups are only visible to the supervisor.

132

| Page 132 | Jan-13-2017 09:38 |

Mana

ging Accounts and Assigning Rights

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

quadient IN-700, User Manual, Page: 137 / 280

Search results

Summary of Contents for IN-700

Reviews: