quadient IN-700 Page 135 User Manual Download

Page: 135 / 280

Operator Management

Follow the steps outlined below to create, modify, activate/deactivate or delete operators.

See also

•

Operator Options

on page 129.

• To print the current list of operators, see

Operator List Report

on page 158.

Creating Operators

In order to create an operator you must first set up an 'Accounts,
with Access Control' in 'Account Mode Management' Mode.

How to Create an Operator

To create an Operator:

In supervisor mode (see

How to Log in as Supervisor

on page 180):

Press

and select the path:

Account Management

Manage Operators

The Manage Operator screen is displayed.

Select

Operator List.

The Operator list screen is displayed.

130

| Page 130 | Jan-13-2017 09:38 |

Mana

ging Accounts and Assigning Rights

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Related manuals for IN-700

Brands by name

Popular brands