quadient IN-700 User Manual Download Page 122

Page: 122 / 280

Naming limitation

Account names and group names must be unique in the account
structure.

Additional information

See also

• About changing the maximum number of accounts, see

Account level

on page 175.

• Printing the current account list:

Account Report

on page 153.

The Budget and Surcharge settings are only available when the
Advanced Reporting option is activated. See

Budget and Surcharge

Preferences

on page 136.

Group Settings

A Group or Subgroup has the following settings, displayed on the Add Group screen:

Description

Format

Setting

Name that you will use when assigning Groups or
Subgroups of Accounts to Operators.

This name has to be unique.

32 Alphanumeric
characters

Name

If a Group is not active, the corresponding Accounts
are not visible. Users cannot select these Accounts.

Active / Inactive

Status

Mana

ging Accounts and Assigning Rights

117

| Page 117 | Jan-13-2017 09:38 |

Summary of Contents for IN-700

























































































































































































































































































Search results

Summary of Contents for IN-700

Reviews:

Brands by name

Popular brands

quadient IN-700, User Manual

Search results

Summary of Contents for IN-700

Reviews:

Brands by name

Popular brands