manualshive.com logo in svg

quadient IN-700, User Manual, Page: 117 / 280

Share
Download
quadient IN-700 User Manual Download Page 117

Implementing 'Remote Account Management'

To implement the 'Remote Account Management' Feature:

1.

Connect the PC to the Mailing System and start the Account Management
Application on the PC: see the diagram in 

Connectors

 on page 20 and the PC

application user guide.

2.

On the Mailing System, activate the mode 'Remote Account Management': see

How to Display and Change the 'Account Mode'

 on page 113.

3.

From the PC application, configure the required accounts and operators: see
the PC application user guide.

If operators or accounts are already created on the Mailing System
they will be deleted when switching to 'Remote Account
Management' mode.

112

|   Page 112 | Jan-13-2017 09:38 |

5

Mana

ging Accounts and Assigning Rights

Summary of Contents for IN-700

























































































































































































































































































Reviews:

No comments