quadient HD-MB50D User Manual Download Page 83

Page: 83 / 108

When You Cannot Print

Cause

Solution

The power is off.

For details about how to turn on the power, see page 30
"Turning On/Off the Power".

The cause is displayed on the screen of
the control panel.

Check the error message or warning status on the
display panel, and then take the required action. For
details about solutions, see page 74 "Messages
Displayed When You Use the Printer Function".

The interface cable is not connected
correctly.

For details about how to connect interface cables
correctly, see "Connecting to the Interface", Operating
Instructions.

The correct interface cable is not being
used.

The type of interface cable you use depends on the
computer. Be sure to use the correct one. If the cable is
damaged or worn, replace it. For details about the
interface cable, see "Connecting to the Interface",
Operating Instructions.

The interface cable was connected after
the power was turned on.

Connect the interface cable before turning on the power.

When You Cannot Print

Summary of Contents for HD-MB50D













































































































Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands

quadient HD-MB50D, User Manual

Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands