quadient HD-MB50D User Manual Download Page 47

Page: 47 / 108

• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences

and end fence. For details, see "Changing the Paper Size in Paper Trays", Operating Instructions.

• You can load envelopes in the paper trays. When loading envelopes, place them in the correct

orientation. For details, see page 58 "Envelopes".

Loading Paper into the Bypass Tray

Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.

• The maximum number of sheets you can load at the same time depends on paper type. Do not

stack paper over the limit mark. For the maximum number of sheets you can load, see page 51
"Recommended Paper Sizes and Types".

Open the bypass tray.

DUL008

Load the paper face down until you hear the beep.

Align the paper guides to the paper size.

If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.

Loading Paper

Summary of Contents for HD-MB50D













































































































Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands

quadient HD-MB50D, User Manual

Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands