quadient HD-MB50D User Manual Download Page 18

Page: 18 / 108

Guide to Functions of the Machine's Options

Guide to Functions of the Machine's External Options

1. Getting Started

High Capacity Tray

with Casters - HD-MB50-HCTRAY

Adds two additional paper trays (Tray 3 & Tray 4) to printer.

Referred to as

"Lower Paper Trays"

in manual

Each tray can hold up to 550 sheets.

2000-Sheet Paper Tray with Casters

HD-MB50-

TRAY2K

Adds one additional Paper Tray (Tray 3) to printer.

Referred to as

Tray 3 (LCT)

in manual.

NOTE:

This is a tandem tray configured for 8.5” x 11” paper only. It can hold two stacks of

1000-sheets of 8.5" x 11" paper. When right stack is empty paper in left stack will automatically shift
to the right for feeding. In addition, half of the tray can be pulled out and loaded with paper while the
other half is in use.

Summary of Contents for HD-MB50D













































































































Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands

quadient HD-MB50D, User Manual

Search results

Summary of Contents for HD-MB50D

Reviews:

Related manuals for HD-MB50D

Brands by name

Popular brands