93
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
5. Open the side cover and lower the conveyor track assembly as shown in
Figure 6.17.
QTL-RND-OPS-00000156-A-00
Figure 6.17 – Lowering the conveyor track assembly
6. Clean the sensors located in the centre of the track as shown in Figure 6.18.
QTL-RND-OPS-00000157-A-00
Figure 6.18 – Cleaning the track sensors
MARK-READING VERSATILE FEEDERS
1.
Raise the Insert Head perspex top cover to access the first installed Versatile
Feeder (mark-reading) station for sensor cleaning.
2. For subsequent installed feeder (mark-reading) stations, these sensors can
only be accessed after dismantling by a manufacturer trained certified
Engineer.
3. Once dismantled, clean the sensors shown in Figure 6.19.
QTL-RND-OPS-00000158-A-00
Figure 6.19 – Cleaning the mark-reading Versatile Feeder sensors
Summary of Contents for DS-200iQ
