100
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
6.2.3.2 TOWER UNIT PAPER JAMS
1. Raise and latch transport assembly No.4, and raise the roller assembly No.5
below it as shown in Figure 6.35.
QTL-RND-OPS-00000173-A-00
Figure 6.35 –
Raise and latching transport assembly No.4, and roller assembly No.5
2. If the jammed paper is not fully visible, turn the blue knobs clockwise or anti-
clockwise to wind it into view.
3. Pull the jammed paper out, and lower the transport assembly and roller
assembly back into their original position.
4. Close the Flex Folder operator side cover once complete.
6.2.3.3 ACCUMULATOR PAPER JAMS
1. To remove accumulator paper jams, raise the accumulator overguide until it
locks up into place as shown in Figure 6.36.
QTL-RND-OPS-00000124-A-00
Figure 6.36 – Raising the Accumulator overguide
2. Remove the jammed paper.
3. Once complete, press the lock latch inwards to release the overguide and
return it into position.
Summary of Contents for DS-200iQ
