99
JUN 2020
USER GUIDE
6
OPERATOR MAINTENANCE
DS-200iQ / DS-600iQ
REV 00
6.2.3
FLEX FOLDER PAPER JAMS
To clear any paper jams in Flex Folder base or tower units, first open the Flex Folder
operator side cover as shown in Figure 6.33.
QTL-RND-OPS-00000125-A-00
Figure 6.33 – Opening the Flex Folder operator side cover
6.2.3.1 BASE UNIT PAPER JAMS
1. Raise and latch the transport assemblies No.1, No.2, and No.3, by pushing the
levers indicated in Figure 6.34.
QTL-RND-OPS-00000172-A-00
Figure 6.34 –
Raise and latching transport assemblies No.1, No.2, and No.3
2. If the jammed paper is not fully visible, turn the blue knobs clockwise or anti-
clockwise to wind it into view.
3. Pull the jammed paper out, and lower the transport assemblies back into their
original position.
4. Close the Flex Folder operator side cover once complete.
Summary of Contents for DS-200iQ
