quadient DS-200iQ, Manual, Page: 9 / 231

General Safety Notes
WARNING
• Keep the work area around the machine clean. A minimum one metre of clear
unobstructed working space is always required around the machine.
• The machine must be used only as intended by the manufacturer and should not
be tampered with or altered in any form.
• The machine must be operated, maintained and or serviced only by trained and
authorised personnel.
• Do not operate the machine unless all of the covers are in place and undamaged,
and all warning labels are in place and legible. If any external cover is damaged,
it must be replaced only by authorised personnel or certified engineers.
• All covers contain interlock safety cut-off switches. Do not try to bypass the
interlock safety switches, and do not attempt to operate the machine without
covers, or if any of the interlock safety switches are inoperable.
• Do not wear any loose clothing or jewellery, and long hair must be tied back or
tucked under a hat when working near the machine, as they may become caught
in any one of the moving parts resulting in injury.
• Before any cleaning, maintenance and or servicing, the machine must be
completely isolated from the power source, by pressing the toggle switch located
at the rear of the Insert Head to the off position, and unplugging the mains power
cable completely from the electrical power supply.
• Ensure the machine is clean before use. Wipe off any paper dust built up outside
the cabinets. If paper dust is collecting inside the machine, open the covers and
vacuum it out gently or use an invertible type non-flammable airduster only.
• Although the manufacturer takes care to eliminate sharp edges to reduce danger,
please handle all manufactured parts with care to avoid any risks of cutting.
• When the machine is not in use, the mains power cable should be completely
disconnected from the electrical power supply, stored and positioned safely.
1
Safety
Standards
Compliance
7
| Page 7 | May-29-2020 11:33 |