quadient DS-200iQ Manual Download Page 6 | Manualshive

Page: 6 / 231

quadient DS-200iQ Manual Download Page 6

Standards and Compliance

1.2

Safety and Legal Markings

Environmental Legal Compliance

This product complies with EU Directive 2012/19/EU, Waste of Electrical and Electronic

Equipment (WEEE), in all EU member states.
This product complies with EU Directive 2011/65/EU, Restriction of Hazardous

Substances (RoHS), in all EU member states.
This product complies with FCC 47CFR Part 15B Class A, Federal Communications

Commission (FCC), in all states and territories of the United States.

Applicable Directives

Low Voltage Directive 2014/35/EU.

Electromagnetic Compatibility Directive 2014/30/EU.
The product presented in this guide meets the requirements of applicable directives.
All machines are built to strict safety specifications in accordance with UL Standards,

Low Voltage Directive, and Electromagnetic Compatibility Directive.
For further information please contact your authorized distributor.

4

| Page 4 | May-29-2020 11:33 |

1

Safety

Standards

Compliance

«
...
4
5
6
7
8
...
»

Summary of Contents for DS-200iQ








































































































































































































































Reviews:

No comments