quadient DS-200iQ, Manual, Page: 174 / 231

Cleaning Conveyor Belts
Accumulated dirt, grime and residue may build up on the surface of the Output
Conveyor, Output Sorter and Turner conveyor belts, specifically after a long period of
use.
Periodic cleaning on the complete surface of the conveyor belts may be required.
To clean the belts, use a lint-free cloth dampened with water. This method will normally
be sufficient, however for more stubborn soiling, the use of a foam-type surface cleaner
may help.
Avoid using strong spirit-based cleaners or solvents, as these
may damage the belts.
Cleaning Rollers
All rollers and feed wheels should be cleaned periodically to remove any residue picked
up from processing printed material.
To clean the rollers and feed wheels, use a lint-free cloth dampened with water. This
method will normally be sufficient, however for more stubborn soiling, the use of a
foam-type surface cleaner may help.
Clean the full width and circumference of all visible rollers and feed wheels.
Most rollers and feed wheels may be turned by hand, though
some may be quite rigid.
Avoid using strong spirit-based cleaners or solvents, as these
may damage the rollers and feed wheels.
172
| Page 172 | May-29-2020 11:33 |
6
Operator
Maintenance