quadient DS-200iQ, Manual, Page: 144 / 231

Insert Head Hopper Fine Tuning
1. Select the Insert Head Hopper document on the Run Screen GUI to open the fine
tuning dialog box options as shown below.
2. Make any necessary adjustments as required. The available options for fine tuning
the Insert Head hopper document are as follows:
- Seal Mode - Adjusts the seal mode of envelopes.
Select Off if manual or later hand insertion is required.
- Deskew - Adjusts the skew of documents.
If skewing occurs, select Low if possible, select High setting only if necessary.
- Wetter Pump On/Off - Turns the Wetter Pump On or Off .
Switch pump On for few seconds if wetter tank has dried out - Wetter tank
will automatically refill in normal use.
3. Press Ok once the desired settings have been made.
142
| Page 142 | May-29-2020 11:33 |
5
Operator
Instructions