quadient DS-200iQ, Manual, Page: 129 / 231

2. Turn the adjustment wheels to open or close the gap, use the markers indicated
in image below as a visual aid to help achieve the required setting.
The separator adjustment wheels for both the 500-Sheet and
1000-Sheet hoppers are identical, however the adjustment
wheel for the 1000-Sheet hopper is orientated vertically.
3. Adjust the separator gap according to the following:
- Single Sheets (up to 100gsm) - The separator roller should just contact the
pad below. Increase the gap slightly if sheets feed erratically.
- Thicker Forms - Slide a form into the gap and adjust the wheel until the
separator just grips it.
4. Close the Flex Folder operator side cover once the desired adjustments have been
made.
Curled Paper Guide Adjustment
500-Sheet hoppers have curled paper guides to help eliminate (in most cases) or
minimize paper/forms from curling when feeding through the hopper.
1. First, simply pull out the required hopper needing adjustment.
5
Operator
Instructions
127
| Page 127 | May-29-2020 11:33 |