46
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
8 Setting up the machine
8.1 Loading the Folder hoppers
Before running with your selected Job, the folder must be set up and loaded with
the stationery you intend to use. There is no need to make any adjustments for fold
lengths, envelope stops etc., as these are all carried out automatically.
The folder is fitted with a high or standard capacity hopper. If high-capacity, the
paper trolley can be withdrawn from the machine as required, e.g. for quickly
changing to a trolley with different paper type for a different job.
•
Ensure that the documents or inserts are orientated correctly for the type
of fold and address position, ie. whether face up or down and address leading or
trailing.
•
At the rear of the machine, press the tray descend button on top of the
unit. Hold it until the tray has descended sufficiently. Load the documents into
the hoppers, ensuring they are pushed fully forward - each hopper can hold up to
5000 sheets of 80 gsm paper. The tray will rise automatically when the machine is
restarted.
•
Each paper hopper can also be withdrawn from the machine by gripping the
latch bar, and moving the hopper rearwards on the castors. This will also allow
spare, pre-loaded hoppers to be quickly moved into place, so avoiding delays in
loading. The hopper has independently adjustable side guides, with three lock
knobs for each. These must be set so that the paper stack is central, with approx.
1mm clearance each side all the way up
.
When a trolley is set for a paper type, it should only be used
for that paper type, to avoid readjustment. If other paper
types are used, further trolleys should be obtained.
