background image

Functions - Persistent Between Modes

Shift+Clock Button: Gate Behaviors

While holding shift, the Clock LED will indicate whether the gates are configured as momentary or 
latching.

Pressing the button while holding shift will toggle between the two options:

• When the LED is blue the gates are 

latching

 (each trigger input will toggle the state of the gat-

ed controls). 
• When the LED is green the gates are 

momentary

 (an incoming gate signal will hold the state of 

the button on if it is off, as long as it is held high).

Latching Gates

Momentary Gates

Shift+Mode Button: Corrupt Offerings

Holding Shift and pressing Mode will swap between the current Data Bender Corrupt effect offer-
ings and the original offerings.

• When the Mode LED is blue, all 5 effects on Corrupt are available.
• When the Mode LED is green, only the original 3 effects on Corrupt are available, Decimate, 
Dropout, and Destroy.

ON

OFF

ON

OFF

Storing Settings Between Power Cycles

Several Settings are stored between power cycles. Settings are stored whenever the Shift button is 
released, as frequently as once every two seconds.

The following settings are stored: 

• Bend state
• Break state
• Corrupt Mode
• Clock source
• Processor Mode (Micro, Macro)
• Stereo Mode (Unique, Shared)
• Windowing amount
• Latching/Momentary gate behavior
• Latching/Momentary freeze button behavior
• Corrupt as Reset behavior

16

Summary of Contents for Data Bender


























Reviews:

Related manuals for Data Bender