Introduction
Thank you for choosing the QTFX-B2 bubble machine as part of your stage effects equipment.
Please read and keep this manual to achieve the best results with your new purchase and
avoid damage through misuse.
Unpacking
Your QTFX-B2 should reach you in good condition, supplied with IEC mains lead(s).
If there are any signs of damage or items missing from the packaging, contact your dealer
immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the
QTFX-B2 to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Refer all servicing to qualified service personnel.
Placement
The QTFX-B2 has an open front fluid tank and should be operated in an upright position.
Choose a position where the bubble output is facing the area to be filled.
Ensure easy access to the rear panel and to the bubble fluid tank for refilling and cleaning.
When moving the unit around, take care not to spill the contents of the tank inside the
machine.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to power outlet
This unit must be earthed
Cleaning
Use a soft dry or slightly damp cloth to clean the casing
Do not use strong solvents for cleaning the unit
Empty contents and rinse the bubble fluid tanks after each use
