AN-X2-MOD-MON Page
53
Click the
Archive File
link. There may be a slight delay while AN-X builds the archive
file.
Select the destination where the file will be stored and save the file.
Update AN-X Firmware
Use
Update AN-X Firmware
to transfer a firmware file to the microSD card on the AN-X.
Firmware files for the AN-X2 have names that begin with AN-X2 and have extension
*.qtf.
WARNING!
Do not update firmware in the AN-X while applications that use the
AN-X are running.
Browse to select the file, then click the
Update Firmware
button to transfer the file.
WARNING!
It is essential that you do not disrupt power while updating firmware,
especially maintenance firmware, to the AN-X2 or while the AN-X2 is
restarting following a firmware update.
Interrupting power at some points in the update process could render the
AN-X inoperative and it will have to be returned to the factory for
reinitialization.
AN-X displays status messages in the lower left corner of the page. When the update is
complete, AN-X displays a message that indicates the success or failure of the update.
