Hardware Installation
2. Preparation before Installation
84
www.qtech.ru
❖
Be sure that the square hold strip is at least 125 mm far from the outboard front door and
the door is at most 25 mm thick to ensure a minimum available distance of 100 mm. The
front door is at least 500 mm far from the back door,
❖
Figure 2-3 Cabinet Dimensions
❖
❖
Be sure that the slide rail in the cabinet is enough to bear the weight of a QSW-7608 and its
installation accessories.
❖
Be sure that the cabinet provides an earthing terminal for the switch to be grounded.
❖
Be sure that the front and back doors of the cabinet have porosities greater than 50% for
good ventilation and heat dissipation.
2.4
Installation Tools
Common Tools
Cross screwdriver, straight screwdriver, related electric and optical
cables
Bolts, diagonal pliers, straps
Special Tools
Anti-static glove, stripping pliers, crimping pliers, crimping pliers for
the crystal head, wire cutter
Fiber Optic Cleaning
Tools
Air-laid paper, optical fiber microscope
Meter
Multimeter, bit error rate tester (BERT), optical power meter