Hardware Installation
7. Replacing Modules
115
www.qtech.ru
2.
Turn down the handle of the module until it is horizontal. Pull the tab to take out the
SFP/SFP+ module, as shown in figure 7-2.
3.
Figure 7-2 Removing the SFP/SFP+ Module
Precaution
❖
Unplug the optical fiber before removing the module.
❖
Do not pull out the module forcefully without turning down the handle of the module.
❖
Immediately install the dust plug to the module port and the switch fiber port.
7.2.2
Removing SFP+ Cables
Pull the tap out and unlock the module. Take out the SFP+ module gently, as shown in figure 7-
3
Figure 7-3 Removing the SFP+ Cable
Precaution
❖
Pull the tab out before unplugging the cables. Otherwise, the module or the slot can be
damaged.
❖
Immediately install the dust plug to the module port and the switch fiber port.
7.3
Replacing Modules
Preparation
1.
Wear an anti-static wrist strap close to your skin and have it properly grounded.
2.
Take out the module from the package.
3.
Take the following steps to replace the module: