TouchMix-30 Pro Windows Driver
Quick Start Guide
1
Introduction
The TouchMix-30 Pro Windows Driver creates an interface between a TouchMix-30 Pro mixer and a computer running the Windows 7, Windows 8, Windows 8.1, or
Windows 10 operating system (recommended). The program supports up to 32 × 32 channels of digital audio between the mixer and the computer.
Installation
1. Extract the compressed folder to a new location.
2. Open the new uncompressed folder and run
Setup
.
3. The Windows operating system will ask if you want to allow the program to make
changes to your device. Click
Yes
.
4. The
Setup Welcome
window will appear. Click
Next >
to continue.
Connection
1. Use a Type B USB cable to connect the mixer's
USB DAW
port to a USB port on your
computer.
5. Accept the default location for the driver folder or browse to another location. Click
Install
.
6. The installer will copy the files to the selected location. When it is done it will present a
message that the driver has been installed on your computer. Click
Finish
.
