32
Stacked Horizontal Array
In a stacked horizontal array, it is possible to employ the upward-facing rigging mechanism to
secure the boxes together.
1. Connect the array boxes together normally in the vertical ground stack configuration.
(See Ground Stack directions above for further details)
2. Identify which side of the loudspeaker has the low frequency wave guide, using the arrow
guide on the rear panel.
— Figure 48 —
3. Unlock the hardware on the low frequency-side of each loudspeaker in the array.
4. Press the Angle Lever to collapse the Angle Bar to 12° (fully collapsed) only on the low
frequency side of each loudspeaker in the array.
5. Ensure hardware is connected and locked on the high frequency-side of each loudspeaker
in the array.
6. Carefully rotate the entire array onto its low frequency side. The horizontal array is ready for use.
Connected
and Locked
Unlocked
— Figure 49 —
— Figure 50 —
— Figure 47 —