21
Pole Mounting a Loudspeaker over a Subwoofer(s)
To deploy a pole mount over a subwoofer(s) with a tilt of 0° or -7.5°, mount the
loudspeaker using the 35 mm pole socket labeled 0° or -7.5° on the bottom of the
loudspeaker.
Stacking an Array on a Pole Mount over a Subwoofer(s)
1. After securing the first loudspeaker to the pole, set the Locking Levers on both sides of the new loudspeaker to the middle (ADD+)
position.
2. Hook both Front Strikes of the new loudspeaker onto the Front Hooks of the loudspeaker mounted to the pole.
3. Lower the back side of the loudspeaker until the new loudspeaker connects with the loudspeaker mounted to the pole, making a
click sound.
4. Push Locking Levers down (LOCK) to secure the new loudspeaker on both sides.
5. Repeat steps 1-4, until array is complete.
— Figure 21 —
— Figure 20 —
Pole Sockets