Qsan XEVO 2.2 Software Manual Download Page 97

Page: 97 / 109

XEVO

Software Manual

Messages Tab

Official

Document

Mute Buzzer

Click the

icon to stop alarm if the system alerts.

Clear Event Logs

Click the icon to clear all event logs.

Select the options and then click the

Apply

button to clear event logs.

CAUTION

Please plug-in any of the first four hard drives, then event logs can be saved
and displayed in next system boot up. Otherwise, the event logs cannot be
saved.

10.2.

Configure Notification Settings

Select the

Messages

tab the

Settings

subtab to configure the notification settings via

Email

Alert

and

SNMP

10.2.1.

Email Settings

Click the

Email

pane to be used to enter up to three email addresses for receiving the event

notifications.

SMTP Settings



SMTP Server:

Enter the IP address or FQDN (Fully Qualified Domain Name) of SMTP server

to deliver the notification mails.



SMTP Port:

Default is port 25. You can change the SMTP port here.



Email-from Address:

Enter the sender email address.

Summary of Contents for XEVO 2.2














































































































Search results

Summary of Contents for XEVO 2.2

Reviews:

Brands by name

Popular brands

Qsan XEVO 2.2, Software Manual

Search results

Summary of Contents for XEVO 2.2

Reviews:

Brands by name

Popular brands