Qsan XEVO 2.2 Software Manual Download Page 30

Page: 30 / 109

XEVO

Software Manual

Dashboard Tab and QSLife

Official

Document

INFORMATION

The performance graphs present the information as the following.



The performance graphs are updated once every 1 minute.



The performance graphs display up to 1 years’ worth of historical data.

4.1.6.

Introduce the Upper Right Corner Icons

At the top right corner, there are four icons and one login name.

Figure 4-3 Upper Right Corner Icons

The options are available in these icons.

QSLife

Click the

icon in the upper right corner to popup a window for QSLife functions. About the

QSLife, please refer to the chapter 4.2,

Introduct QSLife Functions

for more details.

Task Monitoring

Click the icon at the top right corner to popup a window.

It displays the task monitoring of the system. The example shows that the Volume_01 is
initialing at 3%. There are two tabs to choose from.

Storage

tab displays the process of storage

tasks, and the other

Backup

tab displays the progress of backup tasks.

Language

Help

QSLife

Task Monitoring

Language

Login Account

Summary of Contents for XEVO 2.2














































































































Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands

Qsan XEVO 2.2, Software Manual

Search results

Summary of Contents for XEVO 2.2

Reviews:

Related manuals for XEVO 2.2

Brands by name

Popular brands