90 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
Figure 6-2
Warning Message of Controller Module by the Status LED
The following images illustrate mechanical components of the controller module.
Figure 6-3
Mechanical Components of the Controller Module
Table 6-1
Mechanical Components of the Controller Module
Number
Description
1
Release Lever
2
Thumb Screw
The following are detailed steps for removing the controller module from the system
chassis.
Use a Phillips screwdriver to loosen the thumb screws on each release levers.
Pull down both release levers at the same time and then pull out about half length of the
controller module by holding two release levers.
