4
©
Copyright 2019 QSAN Technology, Inc. All Right Reserved.
Each controller has two host card slots allowing you to select your desired host cards
configuration. Optional host cards are on the following.
。
4 x 16Gb Fibre Channel
(SFP+)
ports
(Slot 2 provides 20Gb bandwidth)
。
2 x 16Gb Fibre Channel
(SFP+)
ports
(Slot 2 provides 20Gb bandwidth)
。
4 x 10GbE iSCSI
(SFP+)
ports
(Slot 2 provides 20Gb bandwidth)
。
2 x 10GBASE-T iSCSI
(RJ45)
。
4 x 1GBASE-T iSCSI
(RJ45)
A Cache-to-Flash module is also available for the protection of the system cache data in
your XCubeSAN system
。
BBM (Battery Backup Module) + flash module
(to protect all memory capacity)
。
SCM (Super Capacitor Module) + flash module
(to protect up to 16GB memory per controller)
You can also use SSDs to boost your overall system speed. If you purchase SATA SSDs
for your dual controller XCubeSAN system; you have to purchase 6G MUX board from
QSAN channel partners. Because there are different LFF and SFF disk drive trays, 6G
MUX board is needed to adapt to the type of bracket:
。
SATA 6Gb MUX board for installing 2.5” SATA SSD into LFF 3.5” disk drive tray
。
SATA 6Gb MUX board for installing 2.5” SATA SSD into SFF 2.5” disk drive tray
1.3.
XCubeSAN Series Hardware Specifications
Following tables are hardware specifications of XCubeSAN series.
Table 1-4
XS5200 Series Hardware Specifications
Model name
XS5224D (Dual) XS5216D (dual) XS5212D (Dual)
XS5212S
(Single)
XS5226D (Dual)
XS5226S (Single)
Form Factor
4U 24-bay, LFF 3U 16-bay, LFF
2U 12-bay, LFF
2U 26-bay, SFF
RAID Controller
Dual-active or Single-upgradable controller
Processor
Intel Xeon 4-core processor
(8-core processor models are also available)
Memory
(per
Controller)
DDR4 ECC 8GB, up to 128GB
(four DIMM slots, insert two DIMMs or more will
boost performance)
Host Connectivity
(per Controller)
Optional Host Cards at Slot 1
(PCIe Gen3 x 8)
4 x 16Gb FC
(SFP+)
ports
2 x 16Gb FC
(SFP+)
ports
