Qsan XCubeDAS Series, User Manual

Page: 14 / 53

2 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
Figure 1-2 Connect the Console Cable
2. You must use terminal software such as HyperTerminal or Putty to open the console
after the connection is made.
INFORMATION:
For more information about terminal software, please refer to
HyperTerminal: http://www.hilgraeve.com/hyperterminal/
PuTTY: http://www.putty.org/
3. Here we first demonstrate HyperTerminal. The console settings are on the following.
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control
Terminal type: vt100