64 ©
Copyright 2021 QSAN Technology, Inc. All Right Reserved.
Supported types
UPS via SNMP, Serial UPS with COM port, and USB UPS.
Communication types
network UPS via SNMP, Serial UPS with COM port, and USB
UPS. Serial communication is the only supported type.
Connect the UPS to the XCubeSAN.
The following image is the location for the UPS connection.
Figure 3-37
Location for the UPS System Connection
The table below shows the available UPS cable, model name, and its description.
Table 3-15
Available UPS Cable for XCubeSAN Series
Model Name
Picture
Description
Applied Models
CBL-UPS
UPS Cable, Phone-jack, 1
Meter
XS5200 Series
XS3200 Series
XS1200 Series
For checking the UPS connection and status, please refer to the chapter 6.3.3, UPS Settings
and Status in the
XCubeSAN SANOS 4.0 Software Manual
3.13.
Connecting the Optional USB LCM
If you purchased the USB LCM, please use the enclosed USB extension cable (A-male to A-
female) to c
onnect to the system
. The Following procedures are for the USB LCM
connection:
Connect the USB LCM to the female side of the USB extension cable.
Connect the male side of the USB extension cable to the USB port on the system front
pillar.
