Figure 6-10
Installing the Power Supply Unit in the System Chassis
If the PSU is successfully installed, the status L
ED will show solid
green
color (if no other
malfunction is encountered), then web UI will show Figure 6-11: System Health is
Good
and
no warning message on the upper right side of the SANOS UI.
Figure 6-11
Screenshot of the PSU Successfully Installed in the SANOS UI
6.3.
Removing / Installing the Fan Module
The standard XCubeSAN system comes with two redundant fan modules that allow you to
hot swap it when one of the fan modules encounters an issue. In the event that the fan
module fails, it can be hot-swapped. The XCubeSAN series utilizes two types of fan module
