48
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
7.2.
Memory Cache Protection Module LEDs and Button
Please refer to the following content for definitions of the LED and button behaviors.
Table 7-2
Descriptions of Memory Cache Protection Module LEDs and Button
Number
Definition
1
Power LED:
Solid
Green
: Power is good at flash module.
Off: There is no power at flash module.
2
Status LED:
Solid
Blue
: The status of flash module is good.
Blinking
Blue
and
Amber
Interlaced: Installing or removing the flash module.
Solid
Amber
:
The flash module is failed or wrong PCIe connection speed.
3
Attention Button:
This button has no function at XCubeNXT.
7.3.
Host Card LED Indicator Table
XN8000D supports three optional host cards, including 10GbE via SFP+ (HQ-10G4S2), 10GBASE-
T (HQ-10G2T), or 1GBASE-T (HQ-01G4T) host cards. Please refer to the following content for
definitions of LED behaviors.
HQ-01G4T (1GBASE-T)
Number
Definition
1
Link Status LED (Left):
Green
flashes: Asserted when the link is established, and packets are being
transmitted along with any receive activity (Access).
OFF: No link is detected, or link fails.
2
Speed LED (Right):
Amber
: Asserted when a 1G link is established and maintained.
Green
: Asserted when a 100M link is established and maintained.
OFF: No link is detected, or link fails.
