31
3.4.
Replace System Fan
If a system fan failed to function, please see the instructions below to replace the malfunctioning fan:
CAUTION:
The fan module is a heavy and fragile; please use both hands while installing,
removing, or carrying them. Recommended place for removing the system fan
module: the system is in a well-secured rack or on a stable surface.
1.
Remove the fan module from XCubeNXT.
Press the lever of the fan module at the rear panel in the indicated direction. Pull out
the fan module from the XCubeNXT.
2.
Prepare a new fan module, and push it back to the slot until you hear a ‘click’ sound. Please
make sure that the direction of the fan module is correctly installed, to prevent any potential
damage caused by improper installation.
