QRPworks SideKar Extreme User Manual Download Page 79

Page: 79 / 87

SideKar Extreme User Manual rev 2.1 Page 79 of 87

Appendix A: QRP Labs Classic QCX CAT Port

Here’s the schematic for the QCX CAT port required for QCX
Classic revs 1-5.



Revs 1-4 need all of the components



Rev 5 has the resistors and diode already installed.

You just need to add the 3.5mm connector



QCX+ and QCX Mini have the CAT port installed

already. Nothing further is needed.

NOTE: The QCX and QSX must always be connected to the
FT-Q port on the SideKar Extreme NOT the RS-232 port on
the top. QRPworks is not responsible for any damage to
the SideKar Extreme or the QCX if the wrong serial port is
used.

This schematic can also be found on our website at

www.QRPworks.com

. Click Support / Manuals and look under

the SideKar Extreme section.

Summary of Contents for SideKar Extreme
























































































Search results

Summary of Contents for SideKar Extreme

Reviews:

Related manuals for SideKar Extreme

Brands by name

Popular brands

QRPworks SideKar Extreme, User Manual

Search results

Summary of Contents for SideKar Extreme

Reviews:

Related manuals for SideKar Extreme

Brands by name

Popular brands