SideKar Extreme User Manual rev 2.1 Page 6 of 87
SideKar Extreme Installation
The SideKar Extreme is designed to:
Be mounted on the right side of the KX3
Be mounted on top of the KX2
Sit on a surface (i.e. desktop, rock on a trail)
The same SideKar Extreme can be mounted on the KX2 and
KX3 just by changing a few simple brackets.
KX3 Installation
The SideKar Extreme is designed to mount on the right side of
the KX3, above the antenna BNC connector. .
1. On the right side of the KX3, remove the black flat head
Philips screw in the upper back position, closest to the
A/B button.
2. Install the supplied shoulder screw and clear washer
(already on the screw) in place of the screw removed.
Do not overtighten. A good fit is when the screw starts
to tighten and you feel more resistance.