SideKar Extreme User Manual rev 2.1 Page 41 of 87
Sending a Rig Macro
To send a stored rig macro, just press the Fx or Alt-Fx key of
the macro to be sent, where x is from 1-10 (i.e. Alt-F5). The
sequence of commands will then be sent to the rig.
Editing Stored Text Messages/Macros
The editing features apply to editing text messages and rig
macros. Here are the commands available:
Backspace
: moves the cursor one character to the left
and erases the character
Home
: moves the cursor to the first character.
End
: moves the cursor to the right of the last character
o
If at maximum characters, the cursor will move
to the last character
Arrow Left
: moves the cursor one character to the left.
Arrow Right
: moves the cursor one character to the right
o
If at maximum characters, the cursor will not
move past the last character
Arrow Up
: moves the cursor one line up
Arrow Down
: moves the cursor one line down, but not
past the last character.
Editing has two modes of operation, which are typical of many
editors. The Insert key is used to toggle between these two
modes:
Insert
, where a new character is
inserted
to the left of
the cursor. The cursor will be a blinking box.
Replace
, where a new character
replaces
the character
at the cursor. The cursor will be an underline.
